CleanWirx Products
OxNot Gel by CleanWirx forms a cling gel solution for application via sprayer or brush after abrasive blast cleaning. Deep cleans and decontaminates, removing microcontaminants, iron sulfides and interference materials to improve metal surface condition and eradicate corrosion. Provides visible and invisible metal hygiene.
Coverage:
1-Quart 25 sq. feet
1-Gallon 100 sq. feet
5-Gallon 500 sq. feet
Other products "clean" by masking metal microcontaminants.
CleanWirx metal decontamination systems eradicate rust generators
for remarkably better, longer-lasting results.
Remove, Prevent & Cure Corrosion
It is recognized that a direct correlation exists between the depth and reliability of metal surface preparation and protective paint or coating performance and longevity. Painting or coating over a contaminated surface is like putting a band-aid over dirty skin; you can put on the best protection but it probably won't stay on, and it definitely doesn't address what's festering underneath. Measures like film-formers and inhibitors only mask symptoms of corrosion.
CleanWirx products eradicate corrosion and removes corrosion-generating contaminants, soluble salts and biofilm to prevent corrosion from forming under protective coatings. Professionals depend on CleanWirx decontamination to improve the condition of metal surfaces and optimize paint /coating bonding in one streamlined, continuous process. No reblasting, no dehumidification, no pickling, no inhibitors, no residue. CleanWirx surface preparation products remove interference materials for easier, more effective welding, relieving puddling/porosity issues even in the field.
Environmentally benign CleanWirx products create an unsurpassed level of clean for metals, going beyond "acceptable levels" to attain truly clean, corrosion-free metal surfaces.
Pro Tip: Try OxNot Liquidblast for on-step surface preparation and decontamination that holds the blast while creating optimal metal hygiene and surface receptivity to maximize coating adhesion, performance and consistency.
CleanWirx Clean:
no other products come close.
OxNot LiquidBlast by CleanWirx works simultaneously during wet abrasive vapor blast; add to water tank during normal processes. Cleans and decontaminates, removing the whole laundry list of microcontaminants (whether soluble or ionically bonded) such as sulfides, salts, sulfates nitrates, MIC, microbial films and interference materials to improve metal surface condition and eradicate corrosion. Provides visible and invisible metal hygiene.
Coverage:
1-Quart 25 sq. feet
1-Gallon 100 sq. feet
5-Gallon 500 sq. feet
Wasting time & money on temporary solutions doesn't cure corrosion. Rust converters, inhibitors & salt removers that dilute, mask or convert soluble salts & strongly bonded embedded contaminants deliver cosmetic cleaning for temporary corrosion relief - until oxidation/corrosion inevitably begins again.
OxNot 100% metal hygiene is the corrosion cure that goes beyond visual to microscopically clean meal and prevent corrosion under coating - permanently.
COMING SOON!
OxNot Soak by CleanWirx for application via dip bath. Deep cleans and decontaminates, removing microcontaminants, iron sulfides and interference materials to improve metal surface condition and eradicate corrosion.
Yield:
1-Gallon 10 gallons
5-Gallon 50 gallons
OxNot Rinse removes and deactivates OxNot 2-Step formulas, leaving metal surfaces clean, stabilized and ready for painting or coating. Non film-forming, leaves no residue.
Coverage:
1-Quart 187 sq. feet
1-Gallon 750 sq.feet
5-Gallon 3750 sq.feet