Better Approach, Better Results.
Results Speak Volumes
Consistently achieve surface prep standards above expectations, the first time, every time. OxNot products succeed where other products repeatedly fail.
Humidity-loving OxNot surface preparation products lets pros control variables, avoid process complications. This totally different, straightforward, streamlined approach harnesses solutions proven to permanently eradicate corrosion, ionic contaminants, soluble salts and microbial byproducts from metal surfaces.
Nothing is Everything
Environmentally-benign OxNot products leave nothing but unsurpassed surface cleanliness - NO film, inhibitors or other adhesion-interfering compounds. That "nothing" is important to promoting consistent and maximum adhesion with NO coating compatibility concerns and NO more corrosion reactions beneath protective coatings.
OxNot Gel forms a cling gel solution for application via sprayer or brush after abrasive blast cleaning. 2-Step formula requires OxNot Rinse.
The End of
Add OxNot CleanBlast to the water dank to simultaneously blast, decontaminate and passivate metal while you blast. Removes the whole laundry list of ionic contaminants, microbial films and interference in one step. Holds the Blast longer than any other method.
Visible & Invisible Oxidization/Corrosion
Chlorides & Nitrates
Sulfates & Sulfides
Ionically Bonded Salts
MIC/SRB & Microbial By-Products
Chemical & Biological Contaminants
OxNot Soak is made just for application via submersion or ultrasonic.. 2-Step formula requires OxNot Rinse.
OxNot products let you achieve the ultimate visual & microscopic metal hygiene in minutes. Stops flash rust and prevent corrosion under coatings well into the future. Biodegradable OxNot is completely free of chemical toxins such as methyl chloride, chlorinated solvents, methanol, toluene & acetone.
Add OxNot CleanBlast to the water tank, and blast as usual to simultaneously clean, profile and remove captured impurities- 1-step surface prep, zero dwell time, zero residuals. OxNot creates optimally receptive surfaces that significantly improve adhesion to promote more consistent coating performance. Use OxNot Gel 2-part for post dry-abrasive applications, and OxNot Soak for ultrasonic bath or dip applications.
OxNot products provide unsurpassed surface cleanliness and eliminate the underlying causes of coatings failures, thereby reducing the number of failed inspections, slashing project time and costs, diminishing asset downtime, increasing worker and environmental safety. OxNot saves asset owners money year over year, for exended ROI.